TRP EVO PRO Disc Brake, 4-piston (left lever/front wheel)

The TRP EVO PRO disc brake was developed for ambitious downhill, enduro, trail and e-MTB riders who require constant and controllable braking performance even under extreme conditions.

Following on from the success of the DH-R EVO, the EVO PRO has been further developed in close collaboration with athletes from the Downhill World Cup. The revised version offers extended adjustment options, a shorter lever reach and a Pad Activation Dial (PAD), which can be used to specifically influence the distance between the brake pads and the brake disc and thus the response. The 4-piston brake calliper in combination with the race-proven design ensures powerful and even deceleration. 

The ergonomically shaped brake lever supports controlled operation, while the optimised cockpit design enables clean internal or external cable routing. The top-loading design facilitates pad changes and simplifies maintenance. The brake is also compatible with Bosch ABS PRO and can be integrated into corresponding e-MTB systems.

Details:
• Hydraulic disc brake for downhill, enduro, trail and e-MTB use
• Version with left brake lever, usually for the front brake
• 4-piston brake calliper for powerful and even deceleration
• Pad Activation Dial (PAD) for setting the pad distance and response
• Lever width adjustment for individual customisation 
• Ergonomically shaped brake lever for controlled operation
• Top loading design for easy pad changes
• Optimised cockpit design for internal or external cable routing
• Compatible with Bosch ABS PRO
• Compatible with SRAM MMX and Shimano I-Spec EV

Technical details:
• Material: aluminium
• Number of pistons: 4
• Brake calliper: post mount
• For handlebar Ø: 22.2 mm
• Brake pads: TRP 4-piston Performance Resin (organic)
• Brake fluid: TRP mineral oil
• Lever reach adjustment: yes (without tools)
• Contact point adjustment: yes
• Shift lever integration: yes (SRAM MMX and SHIMANO iSpec compatible)
• Recommended disc rotor: TRP RS05E, 2.3 mm
• Weight: approx. 309 g (incl. 1900 mm hose, without disc and adapter; weight based on manufacturer's measurement with shortened brake hose)

In the box:
• 1 TRP EVO PRO 4-piston disc brake, left lever/front wheel (filled and bled ready for installation)
• 2 TRP 4-piston Performance Resin brake pads (organic)
• 1 olive and insert pin for shortening the brake hoses

Note:
Intended by the manufacturer for use with 2.3 mm thick brake discs.

Manufacturer: TEKTRO Europe GmbH, August-Bebel-Straße 10, 67454 Haßloch, Deutschland, https://eu.trpcycling.com/de