SQlab 610 Infinergy M-D active 2.1 MTB/Touring Saddle

The 610 Infinergy M-D active 2.1 from SQlab is perfect for comfort-orientated mountain bikers and sporty touring riders. This version of the 610 is equipped with BASF's Infinergy material, which promises outstanding comfort qualities.

You will benefit from it in off-road conditions, especially when riding over uneven ground or roots. The Infinergy material absorbs impacts effectively. What’s more, the product developers at SQlab have focussed on providing maximum relief for the sensitive perineal area. This is the result of the strong step saddle concept, which is visible at first glance: the difference in height between the rear and front of the saddle. In combination with the maximised dip, the body weight is distributed evenly across the sit bones.

The 610 Infinergy M-D is also equipped with the sensitive active technology Sport. It allows the pelvis to move sideways during the ride, which can reduce the strain on the lower spine, pelvis and hips. In this way, the intervertebral discs and facet joints are relieved, too. 

Details:
• Comfortable step saddle for mountain bikers and touring riders
• Equipped with the shock-absorbing Infinergy material from BASF
• Equipped with active technology Sport (medium elastomer pre-installed)
• Enables dynamic lateral tilt of the pelvis while pedalling
• Can relieve the lower spine, intervertebral discs and facet joints
• Two-stage seat for excellent support and pressure distribution
• Interlock tapes on the saddle surface replace the cover

Technical details:
• Intended use: MTB, Hybrid, E-Bike
• Unisex 
• Outer fabric: Interlock tapes
• Padding: Light Foam (Shore hardness 55)
• Saddle shell: fibreglass reinforced polyamide (PA12+GF)
• Saddle rails: S-Tube (stainless steel hollow struts)
• Saddle length: approx. 285 mm
• Max. load: 110 kg

Available saddle width:
• 14 cm (weight: approx. 315 g)
• 15 cm (weight: approx. 330 g)
• 16 cm (weight: approx. 337 g)
• 17 cm (weight: approx. 344 g) 
Please indicate your choice. 

In the box:
• 1 SQlab 610 Infinergy M-D active 2.1 saddle
incl. medium elastomer (grey, recommended for 65 to 85 kg body weight)

Tip:
The SQlab elastomer kit for adapting to different rider weights can be found under prod. code: 1651430101.


active Technology:
The active saddle technology allows the saddle to tilt and move easily as soon as the rider shifts their weight. This movement can reduce pressure on sensitive areas, increase stability and promote a natural, ergonomic sitting posture.
Different elastomers in various degrees of hardness allow customisation to the individual rider's weight. 


SQlab saddle width system:
Choosing the right saddle width based on the individual sit bone distance ensures effective weight distribution and optimises comfort and ergonomics. This helps to avoid problems such as numbness, ischial pain, tailbone pain and pressure on the pubic arch. For information on sit bone measurement:
https://www.sq-lab.com/en/ergonomics/sit-bone-measurement-for-bike-saddles
 

Manufacturer: Boards & More GmbH, Rabach 1, 4591 Molln, Austria, www.sq-lab.com