Park Tool HBH-3 Handlebar Telescopic Holding Bar Bike Fixation

The Park Tool HBH-3 handlebar holding bar supports you in repairing and maintaining your bike in the assembly stand with almost infinite possibilities for attaching the handlebar, fork, frame or the stand arm to the bicycle. Independent of frame or handlebar shape. The adjustable telescopic holder is simply strapped onto the corresponding components with the rubber loop holders to stabilise the bike position. The variable telescopic arm with the rotatable and swivelling loop holders gives you enough room to manoeuvre.

The installation takes only a few seconds. So no handlebars turning over when bleeding the brakes, no need to use your thighs to help align the handlebars. Especially when working with an upside-down bike in the assembly stand, the HBH-3 from Park Tool holds the front of your bike in the desired position. Of course, this also applies to forks and other moving parts. With its swivel joint clamps and adjustable non-slip rubber straps, the HBH-3 can be easily mounted in a wide variety of positions at almost any mounting point.

Details:
• Universally usable telescopic pole with variable loop attachment
• Fixes handlebars, fork and other movable attachments to the bicycle
• Usable extension length from approx. 45 to 81 cm
• Stable length locking via clamping screw
• For pipe Ø from approx. 12 - 60 mm (¼" - 1 ⅜")
• Can also be used for angular and oversized tube profiles as well as aero frames
• Plastic frame holder with belt fastener protects the paintwork
• Non-slip rubber straps with easy-grip pull tabs
• Full-tension control due to tight loop perforation
• Rotatable joint clamps for different holding positions
• Folds down to a size of 43 cm for storage
• Anodised aluminium construction, therefore can also be used for bicycle care
• Suitable for almost all bicycle and frame types made of steel, aluminium and carbon
• Material: aluminium, plastic, rubber, steel
• Dimensions: approx. 43 x 5 x 3 cm
• Weight: approx. 270 g

In the box:
• 1 Park Tool HBH-3 Handlebar Telescopic Bike Holding Bar

Manufacturer: Park Tool, 5115 Hadley Ave N St. Paul, MN 55128, USA, www.parktool.com/en-int/
Responsible person: Grofa Action Sports GmbH, Otto-Hahn-Str. 17, 65520 Bad Camberg, Germany, www.grofa.com/de/contact-de/