Maxxis Minion DHF TR EXO 3C MaxxGrip MTB Folding Tyre

For over 20 years, the MAXXIS Minion DHF has been one of the defining gravity tyres in the modern mountain bike sector. The tread pattern is designed for precise turn-in behaviour, high directional stability and controlled cornering. It is used most commonly as a front tyre.

Large side knobs offer high lateral support even in aggressive corners, while the open tread pattern supports traction and control on dry, loose and technical trails. This makes the Minion DHF suitable for a wide range of use, from demanding trail rides to fast enduro lines.

In this version, the Minion DHF combines EXO Protection with the 3C MaxxGrip rubber compound for enduro, trail and all-mountain use, with a focus on maximum control on technical terrain as well as on soft ground and in damp weather conditions.


Technologies:

• EXO PROTECTION
EXO Protection is an extremely cut- and abrasion-resistant protective layer on the sidewall of selected MTB, Gravel and Metro tyres from MAXXIS. The tightly woven material is designed to be both light and flexible, so that the performance of the tyres is affected as little as possible.

• 3C MaxxGrip
3C MaxxGrip is a triple rubber compound from MAXXIS for downhill racing. The compound is designed for maximum grip and high damping properties in order to offer a high level of traction and control even on demanding tracks.

• TUBELESS READY [TR] 
In the MAXXIS range, Tubeless Ready [TR] refers to tyres with a construction that is designed for tubeless use with a sealant, a compatible tubeless rim or matching rim tape. The system enables lower air pressures and is intended to improve traction and ride quality, while reducing the rolling resistance. In addition, minor damages can be sealed directly by the sealant, which reduces the risk of breakdowns.


Technical details:
• Intended use: Enduro, Trail, All Mountain
• Tyre type: clincher (folding tyre)
• Reflective stripes: No
• Tubeless capability: TR (tubeless ready)
• Casing: 60 TPI
• Puncture protection: EXO PROTECTION
• Rubber compound: 3C MaxxGrip

Dimensions:
ETRTO / Inch Size / French Size / Weight** / Tyre pressure / Maximum load / E-bike approval*: 
63-584 / 27.5 x 2.50“ / ---- / approx. 995 g / max. 3.4 bar (50 psi) / 90 kg / E25
63-622 / 29 x 2.50“ / ---- / approx. 1090 g / max. 3.4 bar (50 psi) / 90 kg / E25
*Note:
E-bike approval “no” = no e-bike approval.
E-bike approval "E-25" = approval for pedelecs up to 25 km/h pedal assistance.
E-bike approval "E-50" = approval for S-pedelecs and e-bikes up to 50 km/h subject to compulsory insurance (ECE-R75). 
**Attention:
The actual weights may vary depending on the colour variant.


In the box:
• 1 MAXXIS Minion DHF TR EXO 3C MaxxTerra MTB folding tyre


Note:
Illustration shows 3C MaxxTerra version.

Manufacturer: Cheng Shin Rubber Ind. Co. Ltd, Suite 800, 8F, 50, Sec.1,Shin-Sheng S.Rd, 100 Taipei, Taiwan, www.maxxis.com
Responsible person: Maxxis Europe B.V., Neutronenlaan 7, 5405 NG Uden, Netherlands, maxxis-europe.com