Maxxis HighRoller [Gen.3] TR EXO+ 3C MaxxGrip MTB Folding Tyre

High speed, loose berms and rugged trails: The MAXXIS HighRoller [Gen.3] is at home on aggressive lines and technical terrain. The hybrid knob design covers a wide range of use from soft to hard surfaces and offers precise steering behaviour and high directional stability.

Open centre knobs dig deep into loose and wet surfaces to support traction under braking and acceleration, while large side knobs provide control even in aggressive cornering and lean angles.

In this version, the HighRoller [Gen.3] combines EXO+ Protection with the 3C MaxxGrip rubber compound for aggressive all-mountain and enduro use with a focus on high traction, cornering control and stability in technical terrain.


Technologies:

• EXO+ PROTECTION
EXO+ Protection is based on a 60-TPI casing with an abrasion-resistant rubber coating. The construction is complemented by a reinforced EXO protective layer on the sidewalls and an additional butyl insert above the tyre bead. As a result, the construction is designed for aggressive trail riding, enduro use and the requirements of modern E-MTBs.

• 3C MaxxGrip
3C MaxxGrip is a triple rubber compound from MAXXIS for downhill racing. The compound is designed for maximum grip and high damping properties in order to offer a high level of traction and control even on demanding tracks.

• TUBELESS READY [TR] 
In the MAXXIS range, Tubeless Ready [TR] refers to tyres with a construction that is designed for tubeless use with a sealant, a compatible tubeless rim or matching rim tape. The system enables lower air pressures and is intended to improve traction and ride quality, while reducing the rolling resistance. In addition, minor damages can be sealed directly by the sealant, which reduces the risk of breakdowns.

Technical details:
• Intended use: All-Mountain, Enduro
• Tyre type: clincher (folding tyre)
• Reflective stripes: No
• Tubeless capability: TR (tubeless ready)
• Casing: 60 TPI
• Puncture protection: EXO+ PROTECTION
• Rubber compound: 3C MaxxGrip

Dimensions:
ETRTO / Inch Size / French Size / Weight** / Tyre pressure / Maximum load / E-bike approval*: 
61-584 / 27.5 x 2.40“ / ---- / approx. 1060 g / max. 3.4 bar (49 psi) / 90 kg / E25
61-622 / 29 x 2.40“ / ---- / approx. 1145 g / max. 3.4 bar (49 psi) / 90 kg / E25
*Note:
E-bike approval “no” = no e-bike approval.
E-bike approval "E-25" = approval for pedelecs up to 25 km/h pedal assistance.
E-bike approval "E-50" = approval for S-pedelecs and e-bikes up to 50 km/h subject to compulsory insurance (ECE-R75). 
**Attention:
The actual weights may vary depending on the colour variant.


In the box:
• 1 MAXXIS HighRoller [Gen.3] TR EXO+ 3C MaxxGrip MTB folding tyre

Manufacturer: Cheng Shin Rubber Ind. Co. Ltd, Suite 800, 8F, 50, Sec.1,Shin-Sheng S.Rd, 100 Taipei, Taiwan, www.maxxis.com
Responsible person: Maxxis Europe B.V., Neutronenlaan 7, 5405 NG Uden, Netherlands, maxxis-europe.com