Fidlock PINCLIP saddle bag for saddle base Saddle Holder

With the PINCLIP saddle bag and the corresponding, separately available saddle base saddle holder, you can also use the known magnetic-mechanical fastening system from Fidlock on the saddle bag.

This combination allows you to attach the waterproof saddle bag to the holder in just one easy step and remove it again just as quickly. This gives you super-fast access to the contents of the bag, making it much easier to use when you're on the move.

Details:
• Saddle bag for separately available PINCLIP saddle base (required)
• Secure hold thanks to magnetic-mechanical fastening system
• Enables super-fast loosening and fastening of the saddle bag
• Waterproof material and roll closure according to IPX5 standard
• Magnetic Fidlock bag fastener for easy handling
• Reflective design elements

Technical details:
• Bag material: Polyamide, thermoplastic polyurethane (TPU), polyurethane, polyethylene
• Material magnetic buckle: Polyamide compound, neodymium, stainless steel, epoxy, polyamide, thermoplastic polyurethane (TPU)
• Protection category: IPX5 (protected against spray water from all directions)
Note:
Water resistance in accordance with IPX5 is only achieved if the opening is rolled over three times.

Available versions:
• S (bag volume: approx. 400 ml; weight: approx. 103 g; max. load: 500 g)
• M (bag volume: approx. 700 ml; weight: approx. 143 g; max. load: 500 g)
Please indicate your choice.

In the box:
• 1 Fidlock PINCLIP saddle bag


Note:
To attach the saddle bag to your bike, you also need the Fidlock PINCLIP saddle base (prod. code: 2351760).

Tip:
You can find the bag and holder as a set under prod. code: 2351758.
 

Manufacturer: Fidlock GmbH, Kirchhorster Str. 39, 30659 Hannover, Germany, www.fidlock.com