Fibertec Textile Guard Eco RT Spray Impregnation

Textile Guard RT from Fibertec is a fluorine-free, polymer-based spray-on waterproofing. The formula of the dirt- and water-repellent impregnation achieves a maximum beading effect even when dried at room temperature. Heat treatment in the tumble dryer or with the iron is not necessary anymore.

This waterproofing does not form a closed film on textile surfaces, but rather open-cell structures. This preserves the water-repellent properties and breathability of membrane clothing. Ideal for re-waterproofing while preserving the functionality.

Directions for use:
Fibertec Textile Guard Eco RT waterproofing spray is suitable for almost all types of waterproof and breathable technical clothing with membranes or coatings (e.g. Gore-Tex, Sympatex, Texapore, Hyvent, Ceplex, Dermizax, etc.). For hardshells, softshells, rain jackets, rain trousers, motorbike clothing, ski clothing, sailing clothing. Also suitable for G-1000 and other poly-cotton textiles.

Before waterproofing, wash the garment with "Fibertec PRO WASH" (prod. code 2283282) and allow to drain well. For waterproofing, spray a thin layer of waterproofing agent on the outer fabric, spread evenly over the fabric with a sponge and rub into the fabric. Hang the garment on a wide hanger and leave to dry at room temperature for at least 12 hours. 120 to 150 ml Fibertec waterproofing spray is sufficient for approx. 1 jacket in size L.

Details:
• Spray-on waterproofing for functional clothing
• Optimised for breathable technical clothing
• Strongly water-repellent effect
• Retains the breathability of the waterproof membrane
• Activates at room temperature
• Water-based raw materials
• Polymer active ingredient
• Highly concentrated and economical (sufficient for 4-5 textiles)
• Available as a spray bottle and in a refill pouch (please select the version!)

Technical details:
• Volume: approx. 500 ml

In the box:
• 1 Fibertec Textile Guard RT waterproofing agent (depending on your choice, a 500 ml bottle or a 500 ml refill pack – PLEASE SELECT THE VERSION!)

Note:
Before use, please follow the manufacturer's care instructions. If necessary, first check compatibility on a concealed spot.


Manufacturer: Fibertec GmbH, Friedrich-Krupp-Str. 14, 40764 Langenfeld, Germany, www.fibertec.info